anode 1 3 a node common cathode 2 anode 1 3 2 base common cathode 2 a node common cathode anode 1 3 2 base common cathode 2 a node common cathode anode 1 3 2 base common cathode 2 anode common cathode 1 bulletin pd-20768 rev. a 08/03 t rr =30ns max. i f(av) = 30amp v r = 200v ? hyperfast recovery time ? low forward voltage drop ? low leakage current ? 175c operating junction temperature features hyperfast rectifier 30CTH02 30CTH02s 30CTH02-1 30CTH02fp 30CTH02 to-220ab case styles 30CTH02s d 2 pak 30CTH02-1 to-262 30CTH02fp to-220 fullpack absolute maximum ratings v rrm peak repetitive reverse voltage 200 v i f(av) average rectified forward current @ t c = 159c per diode 15 a @ t c = 125c (fullpack) per diode per device 30 i fsm non repetitive peak surge current @ t j = 25c 200 t j , t stg operating junction and storage temperatures - 65 to 175 c parameters max units description/ applications international rectifier's 200v series are the state of the art hyperfast recovery rectifiers specifically designed with optimized performance of forward voltage drop and hyperfast recovery time. the planar structure and the platinum doped life time control, guarantee the best overall performance, ruggedness and reliability characteristics. these devices are intended for use in the output rectification stage of smps, ups, dc-dc converters as well as free-wheeling diode in low voltage inverters and chopper motor drives. their extremely optimized stored charge and low recovery current minimize the switching losses and reduce over dissipation in the switching element and snubbers. www.irf.com
2 30CTH02, 30CTH02s, 30CTH02-1, 30CTH02fp bulletin pd-20768 rev. a 08/03 www.irf.com v br , v r breakdown voltage, 300 - - v i r = 100a blocking voltage v f forward voltage - 0.92 1.05 v i f = 15a, t j = 25c - 0.78 0.85 v i f = 15a, t j = 125c i r reverse leakage current - - 10 a v r = v r rated - 5 300 a t j = 125c, v r = v r rated c t junction capacitance - 57 - pf v r = 200v l s series inductance - 8 - nh measured lead to lead 5mm from package body electrical characteristics @ t j = 25c (unless otherwise specified) parameters min typ max test conditions units t rr reverse recovery time - - 35 ns i f = 1a, di f /dt = 50a/s, v r = 30v --30 i f = 1a, di f /dt = 100a/s, v r = 30v -26- t j = 25c -40- t j = 125c i rrm peak recovery current - 2.8 - a t j = 25c - 6.0 - t j = 125c q rr reverse recovery charge - 37 - nc t j = 25c - 120 - t j = 125c dynamic recovery characteristics @ t c = 25c (unless otherwise specified) parameters min typ max test conditions units i f = 15a di f /dt = 200a/s v r = 160v parameters min typ max units t j max. junction temperature range - - 175 c t stg max. storage temperature range - 65 - 175 r thjc c thermal resistance, junction to case per diode - - 1.1 c/w fullpack (per diode) - - 3.5 thermal - mechanical characteristics c mounting surface, flat, smooth and greased
3 30CTH02, 30CTH02s, 30CTH02-1, 30ch02fp bulletin pd-20768 rev. a 08/03 www.irf.com fig. 1 - typical forward voltage drop characteristics reverse voltage - v r (v) fig. 3 - typical junction capacitance vs. reverse voltage forward voltage drop - v fm (v) instantaneous forward current - i f (a) reverse voltage - v r (v) junction capacitance - c t (pf) fig. 4 - max. thermal impedance z thjc characteristics t 1 , rectangular pulse duration (seconds) thermal impedance z thjc (c/w) reverse current - i r (ma) fig. 2 - typical values of reverse current vs. reverse voltage 1 10 100 0.4 0.6 0.8 1 1.2 1.4 1.6 tj = 175 ? c tj = 125 ? c tj = 25 ? c 10 100 1000 0 50 100 150 20 0 t = 25 ? c j 0.01 0.1 1 10 0.00001 0.0001 0.001 0.01 0.1 1 10 single pulse (thermal resistance) d = 0.50 d = 0.20 d = 0.10 d = 0.05 d = 0.02 d = 0.01 2 t 1 t p dm notes: 1. duty factor d = t1/ t2 2. peak tj = pdm x zthjc + tc 0.0001 0.001 0.01 0.1 1 10 100 0 50 100 150 200 100 ? c 75 ? c 50 ? c 25 ? c tj = 175 ? c 125 ? c 150 ? c
4 30CTH02, 30CTH02s, 30CTH02-1, 30CTH02fp bulletin pd-20768 rev. a 08/03 www.irf.com fig. 6 - max. allowable case temperature vs. average forward current fig. 7 - max. allowable case temperature vs. average forward current (fullpack) average forward current - i f(av) (a) allowable case temperature (c) average forward current - i f(av) (a) fig. 5 - max. thermal impedance z thjc characteristics (fullpack) t 1 , rectangular pulse duration (seconds) thermal impedance z thjc (c/w) 0.01 0.1 1 10 0.00001 0.0001 0.001 0.01 0.1 1 10 single pulse (thermal resistance) d = 0.50 d = 0.20 d = 0.10 d = 0.05 d = 0.02 d = 0.01 2 t 1 t p dm notes: 1. duty factor d = t1/ t2 2. peak tj = pdm x zthjc + tc fig. 8 - forward power loss characteristics average forward current - i f (av) (a) average power loss ( watts ) (2) formula used: t c = t j - (pd + pd rev ) x r thjc ; pd = forward power loss = i f(av) x v fm @ (i f(av) / d) (see fig. 8); pd rev = inverse power loss = v r1 x i r (1 - d); i r @ v r1 = rated v r 0 5 10 15 20 25 0 5 10 15 20 25 dc rms limit d = 0.01 d = 0.02 d = 0.05 d = 0.1 d = 0.2 d = 0.5 140 150 160 170 180 0 5 10 15 20 25 dc see note (2) square wave (d = 0.50) rated vr applied 100 110 120 130 140 150 160 170 180 0 5 10 15 20 25 dc see note (2) square wave (d = 0.50) rated vr applied allowable case temperature (c)
5 30CTH02, 30CTH02s, 30CTH02-1, 30ch02fp bulletin pd-20768 rev. a 08/03 www.irf.com fig. 10 - typical stored charge vs. di f /dt fig. 9 - typical reverse recovery vs. di f /dt trr ( ns ) qrr ( nc ) di f /dt (a/s ) di f /dt (a/s ) irfp250 d.u.t. l = 70h v = 200v r 0.01 ? g d s dif/dt adjust fig. 11- reverse recovery parameter test circuit reverse recovery circuit di f /dt 10 100 100 1000 if = 15 a r j j v = 390v t = 125 ? c t = 25 ? c 10 100 1000 100 1000 if = 15 a r j j v = 390v t = 125 ? c t = 25 ? c
6 30CTH02, 30CTH02s, 30CTH02-1, 30CTH02fp bulletin pd-20768 rev. a 08/03 www.irf.com outline table 3.78 (0.15) 3.54 (0.14) 10.54 (0.41) max. dia. 15.24 (0.60) 14.84 (0.58) 2.92 (0.11) 2.54 (0.10) 1 term 2 14.09 (0.55) 13.47 (0.53) 3.96 (0.16) 3.55 (0.14) 0.94 (0.04) 0.69 (0.03) 4.57 (0.18) 4.32 (0.17) 3 0.61 (0.02) max. 5.08 (0.20) ref. 1.32 (0.05) 1.22 (0.05) 6.48 (0.25) 6.23 (0.24) 2 0.10 (0.004) 1.40 (0.05) 1.15 (0.04) 2.89 (0.11) 2.64 (0.10) 1 3 2.04 (0.080) max. 2 2 conforms to jedec outline to-220ab dimensions in millimeters and (inches) anode 1 3 2 base common cathode 2 a node common cathode t a t b t rr q rr i f i rrm i rrm 0.5 di(rec)m/dt 0.75 i rrm 5 4 3 2 0 1 di /dt f fig. 13 - reverse recovery waveform and definitions di f /dt 4. q rr - area under curve defined by t rr and i rrm 5. di (rec) m / dt - peak rate of change of current during t b portion of t rr 1. di f /dt - rate of change of current through zero crossing 2. i rrm - peak reverse recovery current 3. t rr - reverse recovery time measured from zero crossing point of negative going i f to point where a line passing through 0.75 i rrm and 0.50 i rrm extrapolated to zero current q rr = t rr x i rrm 2
7 30CTH02, 30CTH02s, 30CTH02-1, 30ch02fp bulletin pd-20768 rev. a 08/03 www.irf.com conforms to jedec outline d 2 pak dimensions in millimeters and (inches) 10.16 (0.40) ref. 8.89 (0.35) 4.57 (0.18) 4.32 (0.17) 0.61 (0.02) max. 5.08 (0.20) ref. 1.32 (0.05) 1.22 (0.05) 13 6.47 (0.25) 6.18 (0.24) 93 ref. 2.61 (0.10) 2.32 (0.09) 5.28 (0.21) 4.78 (0.19) 4.69 (0.18) 4.20 (0.16) 0.55 (0.02) 0.46 (0.02) 14.73 (0.58) 15.49 (0.61) 1.40 (0.055) 1.14 (0.045) 3x 0.93 (0.37) 0.69 (0.27) 2x 11.43 (0.45) 17.78 (0.70) 8.89 (0.35) 3.81 (0.15) 2.08 (0.08) 2x 2.54 (0.10) 2x minimum recommended footprint 2 2 base common cathode 123 anode common cathode a node 12 modified jedec outline to-262 dimensions in millimeters and (inches) outline table 2 base common cathode 123 anode common cathode a node 12
8 30CTH02, 30CTH02s, 30CTH02-1, 30CTH02fp bulletin pd-20768 rev. a 08/03 www.irf.com ordering information table device code 1 5 24 3 1 - current rating (30 = 30a) 2 - c = common cathode 3 - t = to-220, d 2 pak 4 - h = hyperfast recovery 5 - voltage rating (02 = 200v) 6 - none = to-220ac s= d 2 pak "-1" = to-262 option fp = to-220 fullpack 30 c t h 02 - 1 6 conforms to jedec outline to-220 fullpack dimensions in millimeters and (inches) anode 1 3 a node common cathode 2
9 30CTH02, 30CTH02s, 30CTH02-1, 30ch02fp bulletin pd-20768 rev. a 08/03 www.irf.com ir world headquarters: 233 kansas st., el segundo, california 90245, usa tel: (310) 252-7105 tac fax: (310) 252-7309 visit us at www.irf.com for sales contact information. 08/03 data and specifications subject to change without notice. this product has been designed and qualified for industrial level. qualification standards can be found on ir's web site.
|
